Preparation and thermal responsiveness of microencapsulated fluorinated liquids for automatic fire extinguishing.

Most early-stage fires originating in small confined spaces may not be effectively mitigated by automatic fire-extinguishing systems. Leveraging the unique controlled release capability and barrier properties of microcapsules presents a promising avenue for developing multifunctional and intelligent fire-extinguishing agents tailored for early-stage fire suppression. This paper introduces two types of microcapsules that integrate automatic detection and fire extinguishing functions, utilizing fluorinated liquids specifically perfluoro(2-methyl-3-pentanone) and 1,1,1,2,2,3,4,5,5,5 decafluoro-3-methoxy-4(trifluoromethyl)-pentane as core materials. The preparation process was optimized, and the thermal response of the microcapsules was evaluated by directly incorporating them into combustible materials. The results indicated a correlation between the preparation method, coating efficiency, and thermal stability of microcapsules with the core-wall materials. When the fluoride solution in the core material reaches the thermal response threshold temperature, the gas pressure generated during vaporization and phase change can break through the shell, enabling early active fire protection. Beyond a specific threshold of additive microcapsules in the material, the material exhibits self-extinguishing potential during combustion. In cases where the additive amount falls short of achieving self-extinguishing, the fire-resistant performance of materials can be enhanced through various measures. For instance, reducing the amount of fire-extinguishing agents, delaying the ignition time of fuel, and lowering the heat release rate during combustion are effective strategies. Moreover, the degree of improvement is related to the additional amount and the type of core-wall materials. The thermal-response mechanism of microcapsules constitutes a comprehensive mechanism with physical and chemical effects. The finding of this research offer a new technical approach for microencapsulating high-boiling-point gas extinguishing agents, facilitating intelligent and precise prevention of early fires resulting from combustible materials.

Persistent thallium enrichment and its high ecological risks developed from historical carbonaceous Hg-Tl mining waste.

Thallium (Tl) is a priority pollutant with high biotoxicity and has been of great concern worldwide in recent years. The former Lanmuchang Hg-Tl mining site in southwest China is a hotspot of multiple metal(loid)s pollution that previously caused large-scale chronic Tl poisoning, mainly resulting from carbonaceous Tl-bearing mining waste. However, arable land destroyed by historical mining wastes persists at high ecological risks decades after reclamation, but little is known about the solid phase partitioning and species of Tl during soil formation of underlying mining wastes as potential Tl sources. In this study, a representative reclaimed soil profile (100 cm depth) was selected in the lowlands to explore the geochemical cycling and environmental fate of Tl in mining waste-derived subsoil. The Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) analysis revealed an unexpected enrichment of Mn (2920-7250 mg/kg) and Tl (205-769 mg/kg) in the mining waste-derived subsoil. Results from BCR sequential extraction, X-ray Photoelectron Spectroscopy (XPS), and Electron Probe Microanalyses (EPMA) indicate that high Tl loading Mn oxide particulates (up to 15,712 ppm Tl) dominate the sequestration of Tl in the subsoil via oxidation-complexation and have a high potential for migration to both topsoil and groundwater. In addition, insights from microbial fossils and Fe-metabolizing bacteria closely related to Tl indicated that Fe (hydr)oxide particulates showing high Tl levels (up to 3865 mg/kg) point to biomineralization. Detailed mineralogical investigations revealed that hematite-siderite syngenetic particulates could serve as a promising mineralogical proxy for redox oscillations under periodic flooding and recorded the frequent groundwater level fluctuations experienced in the probed profile. Despite the potential for long-term preservation of high Tl loading Fe/Mn (hydr)oxides under HCO3-rich groundwater conditions in karst areas, the reductive release of Tl will be inevitable during flooding, implying that underlying carbonaceous mining waste will pose persistent and severe hazards to the ecosystem.

Rhizosphere Microbial Communities and Geochemical Constraining Mechanism of Antimony Mine Waste-Adapted Plants in Southwestern China.

Antimony (Sb) and arsenic (As) are two hazardous metalloid elements, and the biogeochemical cycle of Sb and As can be better understood by studying plant rhizosphere microorganisms associated with Sb mine waste. In the current study, samples of three types of mine waste-Sb mine tailing, waste rocks, and smelting slag-and associated rhizosphere microorganisms of adapted plants were collected from Qinglong Sb mine, southwest China. 16S rRNA was sequenced and used to study the composition of the mine waste microbial community. The most abundant phylum in all samples was Proteobacteria, followed by Bacteroidota, Acidobacteriota, and Actinobacteriota. The community composition varied among different mine waste types. Gammaproteobacteria was the most abundant microorganism in tailings, Actinobacteria was mainly distributed in waste rock, and Saccharimonadia, Acidobacteriae, and Ktedonobacteria were mainly present in slag. At the family level, the vast majority of Hydrogenophilaceae were found in tailings, Ktedonobacteraceae, Chthoniobacteraceae, and Acidobacteriaceae (Subgroup 1) were mostly found in slag, and Pseudomonadaceae and Micrococcaceae were mainly found in waste rock. Actinobacteriota and Arthrobacter are important taxa for reducing heavy metal(loid) mobility, vegetation restoration, and self-sustaining ecosystem construction on antimony mine waste. The high concentrations of Sb and As reduce microbial diversity.

Rare earth element geochemistry of Middle Devonian reefal limestones of the Dianqiangui Basin, South China: implications for nutrient sources and expansion of the reef ecosystem.

The Givetian Age witnessed the greatest expansion of stromatoporoid-coral reefs from low to higher latitudes of the Phanerozoic. Multi-proxy seawater surface temperature reconstruction suggests the establishment of a super-greenhouse climate as a major reason for reef expansion, yet many questions remain. This article presents the results of a rare earth element and yttrium (herein referred to as REY, derived from REE + Y) geochemical study as well as mineralogy and oxygen isotope values of two well-documented Middle Givetian reefal carbonate sections (Jiwozhai and Buzhai) of the Jiwozhai Formation of South China. The nearshore Jiwozhai patch reef succession displays greater biodiversity and more abundant coral than the marginal platform Upper Buzhai reef. Reefal and micritic carbonates of the Jiwozhai section are characterized by shale-like post-Archean Australian Shale (PAAS)-normalized REY patterns, by very weak negative Ce anomaly values (Ce/Ce* 0.80-0.96; average = 0.89), slightly elevated Y/Ho values (28.9-39.1; average = 34.1), and near-unity values of (Pr/Yb)N (average = 0.87), (Pr/Tb)N (average = 0.80), and (Tb/Yb)N (average = 1.09). Moreover, REY patterns of deposits of the Jiwozhai section differ markedly from those of modern seawater. The described geochemical aspects of the Jiwozhai section and the positive correlation of REY and Th contents displayed by the section point to a terrestrial siliciclastic contribution contemporaneous with reef-building. In contrast, REY patterns of the Upper Buzhai reef section samples are similar to those of modern seawater characterized by light rare earth element (LREE) depletion (average (Pr/Yb)N = 0.76), negative Ce anomalies (average Ce/Ce* = 0.88), and average super-chondritic Y/Ho ratios (average = 45.4)). Slightly positive Eu anomalies (Eu/Eu* = 0.93-1.94; average = 1.36) of the Upper Buzhai reef section samples are attributed to the negligible effect of hydrothermal fluids. Middle REE (MREE) enrichment (average (Tb/Yb)N = 1.48) of Buzhai section carbonate samples and positive correlation of REY and Th suggest a riverine input. Combined with siliciclastic mineralogy, oxygen isotope values, and reef-building biota morphology of the studied two sections, we suggest that terrestrial nutrients delivered by rivers far outweighed upwelling as a source of nutrients supplied to the Givetian reef ecosystem of South China. Coral and stromatoporoid in tropic oceans thrived in turbid water containing abundant terrestrial sediment and the nutrient-laden water helped expand reef-builder habitats during the Givetian time.

Impact of SOA-induced pattern effect on the filter requirements in vestigial sideband direct detected PAM4 transmission.

In an optical filter based VSB-DD transmission system, semiconductor optical amplifier (SOA) is a promising option to enhance system optical power margin. While, in practical system, the low input saturation power makes the SOA-amplified signal susceptible to the pattern effect, which causes a considerable spectral broadening, thereby influencing the design of VSB filter. In this paper, the relationship between SOA-induced pattern effect and the requirements of the VSB filter is systematically investigated. Firstly, qualitative analysis is given and upper sideband (USB) is proved better than lower sideband (LSB) owing to the suppression of SOA-induced pattern effect. Then, 56Gbps IM/DD PAM4 transmission is experimentally conducted. With respective optimal filter configuration, performance of USB signal is superior to LSB signal in all cases. Results show that USB signal has 1dB sensitivity superiority to LSB signal for 56Gb/s PAM4 after 40km transmission. And in 80km case, only by using USB signal, can HD-FEC limit (3.8 × 10-3) be achieved. Also, we study requirements on other filter parameters, including redundant bandwidth and filter steepness.

High tolerance against chirp induced distortions in PAM4-based digital mobile fronthaul by sample bits interleaving.

Directly modulated lasers (DMLs) and electro-absorption modulated lasers (EMLs) are key transmitter options in future short-haul networks. However, both of them suffer from frequency chirp, which incurs nonlinear distortions, especially to high order modulation signals. In this paper, we investigate their application in PAM4-based digital mobile fronthaul and propose a scheme to remarkably improve the fidelity of radio signal. We first give a detailed study of the BER distribution of DML/EML based PAM4 signals and find that the BER of the second bit is much higher than that of the first bit in both systems. Accordingly, we propose to adopt sample bit interleaving to reduce the radio signal distortions caused by sample bit errors. Experimental results of 56Gbps I/Q data transmission reveal that, in a DML-based transmission system, the proposed scheme respectively leads to up to 8dB and 13dB EVM reduction to accommodate 33 × 100MHz 1024QAM OFDM signals and 64QAM OFDM signals in 10km and 20km cases. As well as in an EML-based transmission system, 14dB EVM reduction is achieved in 10km to finally accommodate 33 × 100MHz 256QAM OFDM signal.

Nature-Inspired Capillary-Driven Welding Process for Boosting Metal-Oxide Nanofiber Electronics.

Recently, semiconducting nanofiber networks (NFNs) have been considered as one of the most promising platforms for large-area and low-cost electronics applications. However, the high contact resistance among stacking nanofibers remained to be a major challenge, leading to poor device performance and parasitic energy consumption. In this report, a controllable welding technique for NFNs was successfully demonstrated via a bioinspired capillary-driven process. The interfiber connections were well-achieved via a cooperative concept, combining localized capillary condensation and curvature-induced surface diffusion. With the improvements of the interfiber connections, the welded NFNs exhibited enhanced mechanical property and high electrical performance. The field-effect transistors (FETs) based on the welded Hf-doped In2O3 (InHfO) NFNs were demonstrated for the first time. Meanwhile, the mechanisms involved in the grain-boundary modulation for polycrystalline metal-oxide nanofibers were discussed. When the high-k ZrO x dielectric thin films were integrated into the FETs, the field-effect mobility and operating voltage were further improved to be 25 cm2 V-1 s-1 and 3 V, respectively. This is one of the best device performances among the reported nanofibers-based FETs. These results demonstrated the potencies of the capillary-driven welding process and grain-boundary modulation mechanism for metal-oxide NFNs, which could be applicable for high-performance, large-scale, and low-power functional electronics.

Electronic Devices Based on Oxide Thin Films Fabricated by Fiber-to-Film Process.

Technical development for thin-film fabrication is essential for emerging metal-oxide (MO) electronics. Although impressive progress has been achieved in fabricating MO thin films, the challenges still remain. Here, we report a versatile and general thermal-induced nanomelting technique for fabricating MO thin films from the fiber networks, briefly called fiber-to-film (FTF) process. The high quality of the FTF-processed MO thin films was confirmed by various investigations. The FTF process is generally applicable to numerous technologically relevant MO thin films, including semiconducting thin films (e.g., In2O3, InZnO, and InZrZnO), conducting thin films (e.g., InSnO), and insulating thin films (e.g., AlO x). By optimizing the fabrication process, In2O3/AlO x thin-film transistors (TFTs) were successfully integrated by fully FTF processes. High-performance TFT was achieved with an average mobility of ∼25 cm2/(Vs), an on/off current ratio of ∼107, a threshold voltage of ∼1 V, and a device yield of 100%. As a proof of concept, one-transistor-driven pixel circuit was constructed, which exhibited high controllability over the light-emitting diodes. Logic gates based on fully FTF-processed In2O3/AlO x TFTs were further realized, which exhibited good dynamic logic responses and voltage amplification by a factor of ∼4. The FTF technique presented here offers great potential in large-area and low-cost manufacturing for flexible oxide electronics.

Solution Combustion Synthesis: Low-Temperature Processing for p-Type Cu:NiO Thin Films for Transparent Electronics.

Low-temperature solution processing opens a new window for the fabrication of oxide semiconductors due to its simple, low cost, and large-area uniformity. Herein, by using solution combustion synthesis (SCS), p-type Cu-doped NiO (Cu:NiO) thin films are fabricated at a temperature lower than 150 °C. The light doping of Cu substitutes the Ni site and disperses the valence band of the NiO matrix, leading to an enhanced p-type conductivity. Their integration into thin-film transistors (TFTs) demonstrates typical p-type semiconducting behavior. The optimized Cu5% NiO TFT exhibits outstanding electrical performance with a hole mobility of 1.5 cm2 V-1 s-1 , a large on/off current ratio of ≈104 , and clear switching characteristics under dynamic measurements. The employment of a high-k ZrO2 gate dielectric enables a low operating voltage (≤2 V) of the TFTs, which is critical for portable and battery-driven devices. The construction of a light-emitting-diode driving circuit demonstrates the high current control capability of the resultant TFTs. The achievement of the low-temperature-processed Cu:NiO thin films via SCS not only provides a feasible approach for low-cost flexible p-type oxide electronics but also represents a significant step toward the development of complementary metal-oxide semiconductor circuits.

Photochemical Activation of Electrospun In2O3 Nanofibers for High-Performance Electronic Devices.

Electrospun metal oxide nanofibers have been regarded as promising blocks for large-area, low-cost, and one-dimensional electronic devices. However, the electronic devices based on electrospun nanofibers usually suffer from poor performance and inferior viability. Here, we report an efficient photochemical process using UV light generated by a high-pressure mercury lamp to promote the electrical performance of the nanofiber-based electronic devices. Such UV treatment can lead to strong photochemical activation of electrospun nanofibers, and therefore, a stable adherent nanofiber network and electronic-clean interface were formed. By use of UV treatment, high-performance indium oxide (In2O3) nanofiber based field-effect transistors (FETs) with highly efficient modulation of electrical characteristics have been successfully fabricated. To reduce the operating voltage and further improve the device performance, the In2O3 nanofiber FETs based on solution-processed high-k AlOx dielectrics were integrated and investigated. The as-fabricated In2O3/AlOx FETs exhibit superior electrical performance, including a high mobility of 19.8 cm2 V-1 s-1, a large on/off current ratio of 106, and high stability over time and cycling. The improved performance of the UV-treated FETs was further confirmed by the integration of the electrospun In2O3/AlOx FETs into inverters. This work presents an important advance toward the practical applications of electrospun nanofibers for functional electronic devices.

Emodin elicits cytotoxicity in human lung adenocarcinoma A549 cells through inducing apoptosis.

This study investigated the mechanism of the cytotoxic effect of emodin, an active anthraquinone, on human lung adenocarcinoma A549 cells. In vitro growth inhibition and suppression on colony forming were used to evaluate the effects of emodin on A549 cells. Emodin's ability in changing the expressions of apoptosis-related genes was studied by real-time RT-PCR. Emodin could significantly inhibit the growth of A549 cells with IC50 = 16.85 µg/ml (~60 µM). It also concentration dependently inhibited the colony-forming ability of A549 cells with IC50 = 7.60 µg/ml (~30 µM). Hallmarks of apoptosis, such as single-strand DNA breakage and DNA fragmentation, were observed in A549 cells treated with emodin. Emodin (72 h) treatment could up-regulate the gene expression of FASL (p < 0.05) and down-regulate the gene expression of C-MYC (p < 0.01), but induce no significant changes in the gene expressions of MCL1, GAPDH, BAX and CCND1. These results suggest that emodin could induce growth inhibition and apoptosis in A549 cells through modifying the extrinsic apoptotic pathways and the induction of cell cycle arrest.